Request for Zoning Change Log Out | Topics | Search
Moderators | Register | Edit Profile

City of Frisco Question and Answer Board » Archive » Request for Zoning Change « Previous Next »

Author Message

Posted on Thursday, October 10, 2002 - 03:43 pm:   

Could you please tell me what the "Request for Zoning Change" is on Warren Parkway, next to the Self Storage Warehouse at Hillcrest? thank you.

Douglas C. Mousel
Posted on Friday, October 11, 2002 - 02:15 pm:   

The zoning change is a request to amend a Specific Use Permit approved by the City Council on September 17, 2002 for a Child Day Care Center for Warren Montessori School. The previously approved Specific Use Permit showed a one-story day care consisting of 12,000 square feet. The applicant is proposing to reorient the building and increase the square footage to 14,886 square feet. A building, premise, or land used under a Specific Use Permit may be enlarged, modified, structurally altered, or otherwise changed provided the changes do not:

· Increase the height of structures, including antenna support structures.
· Increase building square footage from its size at the time the original Specific Use Permit was granted by greater than ten (10) percent;
· Reduce the distance between a building or noise-generating activity on the property and an adjacent, off-site residential use. This provision shall not apply should the property and the residential use be separated by a major thoroughfare depicted on the City’s Thoroughfare Plan; or
· Reduce the amount of open space as indicated on the previously approved zoning exhibit.

Because the size of the building is being increased by greater than ten (10) percent, a new Specific Use Permit is required.

Douglas C. Mousel
Zoning & Subdivision Administrator
Planning and Development Department
(972) 335-5540
(972) 335-5549 (fax)

Add Your Message Here
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Options: Post as "Anonymous"
Enable HTML code in message
Automatically activate URLs in message