Appliance code Log Out | Topics | Search
Moderators | Register | Edit Profile

City of Frisco Question and Answer Board » Frisco Q & A » Residential building code » Appliance code « Previous Next »

  Thread Last Poster Posts Pages Last Post
  Start New Thread        

Author Message
 

Rick ostroff
New member
Username: Rockost

Post Number: 1
Registered: 04-2011
Posted on Saturday, April 02, 2011 - 03:53 pm:   

I had a new dishwasher installed and installer told me he would have to install a 110 electrical outlet since the old dishwasher was hard wired. He said he could only install it if he added the outlet because he would have to bring it up to code. Is this correct?
 

Steve Covington, Chief Building Off
Moderator
Username: Steve

Post Number: 84
Registered: 03-2005
Posted on Wednesday, April 06, 2011 - 08:36 am:   

No, a receptacle is not required. When a permanently installed appliance is rated at less than 300 volt-amps or 1/8 horsepower, the circuit over current protection device can act as the disconnecting means for the appliance. Table E4001.5, 2006 International Residential Code.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: