Panther Creek Estates PID Log Out | Topics | Search
Moderators | Register | Edit Profile

City of Frisco Question and Answer Board » Frisco Q & A » Panther Creek Estates PID « Previous Next »

  Thread Last Poster Posts Pages Last Post
  Start New Thread        

Author Message

j stevenson
New member
Username: Jstevenson

Post Number: 1
Registered: 07-2007
Posted on Monday, September 24, 2007 - 03:49 pm:   

How many PIDís are in the Panther Creek Estates? What are the street boundaries for each PID? Are all residents in the PID assessed the same amount or is it based on your home builder? I discovered that Ĺ of my HOA dues are sent to the PID for maintenance. Who sets the rate for the PID maintenance?

Curt Balogh, Spec. Asst. to the City Mgr
Board Administrator
Username: Admin

Post Number: 459
Registered: 02-2003
Posted on Thursday, September 27, 2007 - 07:43 am:   

There are two PIDs in the Panther Creek Estates area; PID #1 in Panther Creek Estates and PID #2 in the Dominion at Panther Creek. PID #1 has Hillcrest Road on the west border, Eldorado Parkway for the southern, Panther Creek Parkway for the northern border and the eastern border just east of Granbury Dr., a line adjacent to the Water Tower site. PID #2 has a western border that starts at Toscana Way, Eldorado Parkway for the southern border, Hillcrest Road for the eastern border and stops approximately at McCommas Drive on the north. These boundaries are approximate as they are not straight lines. The assessments were not the same for the two PIDs; the amount was based on the number of estimated lots in the development. Total original assessment in PID #1 was $2,497.82 and the original amount for PID #2 was $3,014.59. The maintenance was based on an original estimate from the developer and the management company. We recently held a PID board meeting to discuss some concerns from the two HOA associations and the management companies. We hope this answers your questions. Please feel free to contact Nell Lange, (972) 292-5110 or if you need additional information.

Add Your Message Here
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Options: Enable HTML code in message
Automatically activate URLs in message